S.1 - GENERAL - Section Menu
- The exhaust system is comprised of either:
- Fabricated manifolds into a common intermediate pipe
- Cast manifold into a common intermediate pipe.
- With the fabricated manifold type of exhaust, ports '1' and '4' exhaust into one manifold, while ports '2' and '3' exhaust into a further manifold.
- With the cast type of manifold, all ports exhaust into the one common manifold.
S.2 - FABRICATED TYPE SYSTEM - Section Menu
- To Remove
- Release the clip connecting the intermediate pipe to the silencer.
- Remove fixings securing silencer and remove silencer from car.
- Release the clips connecting the intermediate pipe to manifolds and remove intermediate pipe.
- Remove the nuts securing the manifolds to cylinder head and pull manifolds from their mounting studs.
- If difficulty is experienced in removing the manifolds, it is suggested that the L/H engine mounting bracket be first removed (see Section 'E').
- To Replace
- Reverse the removal instructions.
S.3 - CAST TYPE SYSTEM - Section Menu
- To Remove
- Release the clip connecting the intermediate pipe to the silencer.
- Remove fixings securing silencer and remove silencer from car,
- Remove the nuts securing the flange of the intermediate pipe to the manifold and remove intermediate pipe.
- Remove the nuts securing the manifold to the cylinder head and remove manifold.
- To Replace
- Reverse the removal instructions.
S.4 - SILENCER - Section Menu
S.5 -INTERMEDIATE PIPE - Section Menu
Other Notes: [edit]
This area is a public scratchpad for notes.
Please be courteous with what you post, and do not erase someone else's work.
Section Menu
|